Enterprise Customers: Enterprise customers can set standard tolerances across their projects through the Company Tolerance page under Settings on the Siteaware platform.
Every element that Siteaware inspects is judged against a pre-defined tolerance. These tolerances are established during the project kickoff, and project teams can adjust these values to their needs by contacting their CXM.
Below is a table of Siteaware's recommended tolerances by element type. For a full list of possible tolerances per element, review the Project Tolerances page under Settings on the Siteaware platform.
Note: The minimum achievable tolerance is 1/4", but this requires that drawings be provided in CAD format and the use of a total station for measuring the GCPs.
| Trade | Element | Recommended Tolerance (Imperial) | Recommended Tolerance (Metric) |
| Concrete/Steel | Beams | 1" | 30mm |
| Columns | 1" | 30mm | |
| Core Walls | 1" | 30mm | |
| Deck Forms | 1" | 30mm | |
| Footings | 2" | 60mm | |
| Grade Beams - Load Bearing | 2" | 60mm | |
| Grade Beams- Non-Load Bearing | 12" | 300mm | |
| Hold Downs | 1" | 30mm | |
| Openings | 1" | 30mm | |
| Piles | 3" | 100mm | |
| Slab Edge | 1" | 30mm | |
| Embeds | Anchor Bolts | 1" | 30mm |
| CIP Embeds | 1" | 30mm | |
| MEPF | Chases | 1" | 30mm |
| Sleeves | 1" | 30mm | |
| Hangers | 1" | 30mm | |
| Floor Drains | 3" | 100mm | |
| Electrical Boxes | 1" | 30mm | |
| Conduit | 1" | 30mm |